The first vitamin B6 zinc complex, pyridoxinato-zinc acetate: A 1D coordination polymer with polar packing through strong inter-chain hydrogen bonding

The biologically important pyridoxinato(1−) ligand (anionic vitamin B₆) shows the rare phenolate-hydroxymethyl chelation plus bridging mode through the pyridine-nitrogen atom towards zinc(II) to give the one-dimensional (1D) coordination polymer {(acetato-κO)-aqua-μ-[2-methyl-3-oxy-4,5-di(hydroxymethyl)pyridine-κN:O,O′]zinc(II)}·monohydrate with polar packing of adjacent chains along the polar c axis (in space group Pc) through strong inter-chain hydrogen bonding.     

Coordination polymers of Ln(III): Synthesis, characterization, catalytic and antimicrobial aspects

Coordination polymers of HEAP-ED with La(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III) and Dy(III) metal ions have been synthesized and characterized by elemental analyses, electronic spectra, magnetic susceptibilities, FTIR, NMR, scanning electronic microscopy (SEM) and thermogravimetric analyses. Catalytic activity of selected coordination polymers was examined for pharmaceutical important organic synthesis. Antimicrobial activity of isolated Ln(III) coordination polymers against Escherichia coli, Bacillus subtilis, Staphylococcus aureus (bacteria) and Saccharomyces cerevisiae (yeast) were measured. It was observed from the study that the Ln(III) coordination polymers acted as an efficient and effective catalysts and antimicrobial agents.     

Mode of action of a surfactant–polymer formulation to support performance of the entomopathogenic nematode Steinernema carpocapsae for control of diamondback moth larvae (Plutella xylostella)

The use of entomopathogenic nematodes on cabbage leaves against larvae of the diamondback moth (DBM) Plutella xylostella requires the addition of formulation adjuvants to achieve satisfying control. Without adjuvants nematodes settle in the tank mix of backpack sprayers causing uneven distribution. The polymers arabic and guar gum, alginate and xanthan were used in concentrations between 0.05 and 0.3% to retard sedimentation of Steinernema carpocapsae. Arabic gum had no effect, guar gum prevented sedimentation at 0.3% but the effect dropped significantly at lower concentration. At 0.05%, xanthan prevented nematode sedimentation better than alginate. Deposition of nematodes on the leaves was significantly increased by the addition of any of the polymers. Spraying nematodes on leaves with an inclination of 45° without the addition of any formulation resulted in 70% run-off. Adding 0.2% alginate or xanthan reduced the losses to <20%. The use of a surfactant–polymer formulation significantly reduced defoliation by DBM larvae. Visual examinations provided evidence that nematodes are not ingested by DBM larvae. Invasion of S. carpocapsae is an active process via the anus. The function of the formulation is not to prolong nematode survival, but to provide environmental conditions which enable rapid invasion of the nematodes. Nematode performance was improved by selection of the best surfactant in combination with xanthan and by optimisation of the concentrations of the surfactant Rimulgan® and the polymer xanthan. The best control results were achieved with Rimulgan® at 0.3% together with 0.3% xanthan, causing DBM mortality of >90% at 80% relative humidity and >70% at 60%. The formulation lowered the LC₅₀ from 12 to 1 nematode/larva. The viscosity of the surfactant–polymer formulations correlated well with nematode efficacy, prevention of sedimentation and adherence to the leave. This physical parameter can therefore be recommended for improvement of nematode formulations to be used for foliar application against DBM.     

A molecularly imprinted nanofilm‐based quartz crystal microbalance sensor for the real‐time detection of pirimicarb

This study aimed to prepare a novel quartz crystal microbalance (QCM) sensor for the detection of pirimicarb. Pirimicarb‐imprinted poly (ethylene glycol dimethacrylate‐N‐metacryloyl‐(l )‐tryptophan methyl ester) [p (EGDMA‐MATrp)] nanofilm (MIP) on the gold surface of a QCM chip was synthesized using the molecular imprinting technique. A nonimprinted p (EGDMA‐MATrp) nanofilm (NIP) was also synthesized using the same experimental technique. The MIP and NIP nanofilms were characterized via Fourier transform infrared spectroscopy attenuated total reflectance spectroscopy, contact angle, atomic force microscopy, and an ellipsometer. A competitive adsorption experiment on the sensor was performed to display the selectivity of the nanofilm. An analysis of the QCM sensor showed that the MIP nanofilm exhibited high sensitivity and selectivity for pirimicarb determination. A liquid chromatography‐tandem mass spectrometry method was prepared and validated to determine the accuracy and precision of the QCM sensor. The accuracy and precision of both methods were determined by a comparison of six replicates at three different concentrations to tomato samples extracted by using a Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method. The limit of detection of the QCM sensor was found to be 0.028 nM. In conclusion, the QCM sensor showed good accuracy, with recovery percentages between 91 and 94%. Also, the pirimicarb‐imprinted QCM sensor exhibited a fast response time, reusability, high selectivity and sensitivity, and a low limit of detection. Therefore, it offers a serious alternative to the traditional analytical methods for pesticide detection in both natural sources and aqueous solutions.     

Hidden smectic properties of a chiral side-chain co-oligomer

We recently showed that a side-chain industrial co-oligosiloxane presents a quenchable enlarged blue phase behaviour at the cholesteric-isotropic phase transition. In this paper, we present the results of a structural study based on X-ray diffraction, differential scanning calorimetry and optical measurements. In particular, the smectic A organisation is demonstrated in the lower temperature domain, which was hitherto understood as a cholesteric phase. A structural model for this phase is proposed on the basis of the analysis of the anisotropic scattering of stretched fibers. Our results also suggest that the observed glass transition is indeed a rather complex phenomenon, which seems to involve not only the freezing of the main chains, but also smectic correlations at the side-chain level. Moreover, the calorimetric study indicates that, notwithstanding the conservation of the processed film's optical properties, low kinetic reorganisations occur at room temperature.     

Mechanism for Cd2+ inhibition of (K++ Mg2+)ATPase activity and K+ (86Rb+) uptake join roots of sugar beet (Beta vulgaris)

Steady state kinetics were used to examine the influence of Cd²⁺ both on K⁺ stimulation of a membrane-bound ATPase from sugar beet roots (Beta vulgaris L. cv. Monohill) and on K⁺(⁸⁶Rb⁺) uptake in intact or excised beet roots. The in vitro effect of Cd²⁺ was studied both on a 12000–25000 g root fraction of the (Na⁺+K⁺+Mg²⁺)ATPase and on the ATPase when further purified by an aqueous polymer two-phase system. The observed data can be summarized as follows: 1) Cd²⁺ at high concentrations (>100 μM) inhibits the MgATPase activity in a competitive way, probably by forming a complex with ATP. 2) Cd²⁺ at concentrations <100 μM inhibits the specific K⁺ activation at both high and low affinity sites for K⁺. The inhibition pattern appears to be the same in the two ATPase preparations of different purity. In the presence of the substrate MgATP, and at K⁺ <5 mM, the inhibition by Cd²⁺ with respect to K⁺ is uncompetitive. In the presence of MgATP and K⁺ >10 μM, the inhibition by Cd²⁺ is competitive. 3) At the low concentrations of K⁺, Cd²⁺ also inhibits the 2,4-dinitrophenol(DNP)-sensitive (metabolic) K⁺(⁸⁶Rb⁺) uptake uncompetitively both in excised roots and in roots of intact plants. 4) The DNP-insensitive (non metabolic) K⁺(⁸⁶Rb⁺) uptake is little influenced by Cd²⁺. As Cd²⁺ inhibits the metabolic uptake of K⁺(⁸⁶Rb⁺) and the K⁺ activation of the ATPase in the same way at low concentrations of K⁺, the same binding site is probably involved. Therefore, under field conditions, when the concentration of K⁺ is low, the presence of Cd²⁺ could be disadvantageous.     

评论：塑料结合模块促进聚对苯二甲酸乙二醇酯的酶法降解

塑料的大量生产和无节制的使用已造成严重的环境污染。为了减少塑料废物对环境的影响,近年来塑料酶法降解已成为国内外研究者关注的热点。例如,通过蛋白质工程策略提高塑料降解酶催化活性和热稳定性,进一步提高酶法降解的效率。另外,通过融合酶策略将塑料结合模块与塑料降解酶融合,也可以促进塑料降解。近期发表在期刊Chem Catalysis的一项研究表明,采用碳水化合物结合模块融合策略可以在低浓度(<10 wt%)的底物聚对苯二甲酸乙二醇酯[poly(ethylene terephthalate),PET]中提高塑料降解酶的活性。但是在高浓度底物(10 wt%−20 wt%)中,该策略无法提高PET的酶法降解。该项研究对于采用塑料结合模块促进酶法降解塑料具有重要的指导意义。     

Surface imprinted bio-nanocomposites for affinity separation of a cellular DNA repair protein

Apurinic/apyrimidinic endonuclease 1 (APE1) is a multifunctional DNA repair protein localized in different subcellular compartments. The mechanisms responsible for the highly regulated subcellular localization and “interactomes” of this protein are not fully understood but have been closely correlated to the posttranslational modifications in different biological context. In this work, we attempted to develop a bio-nanocomposite with antibody-like properties that could capture APE1 from cellular matrices to enable the comprehensive study of this protein. By fixing the template APE1 on the avidin-modified surface of silica-coated magnetic nanoparticles, we first added 3-aminophenylboronic acid to react with the glycosyl residues of avidin, followed by addition of 2-acrylamido-2-methylpropane sulfonic acid as the second functional monomer to perform the first step imprinting reaction. To further enhance the affinity and selectivity of the binding sites, we carried out the second step imprinting reaction with dopamine as the functional monomer. After the polymerization, we modified the nonimprinted sites with methoxypoly (ethylene glycol) amine (mPEG-NH₂). The resulting molecularly imprinted polymer-based bio-nanocomposite showed high affinity, specificity, and capacity for template APE1. It allowed for the extraction of APE1 from the cell lysates with high recovery and purity. Moreover, the bound protein could be effectively released from the bio-nanocomposite with high activity. The bio-nanocomposite offers a very useful tool for the separation of APE1 from various complex biological samples.     

Benzoylcellulose derivatives as chiral stationary phases for open tubular column chromatography

The application of cellulose-based stationary phases for chiral separations has been extended to open tubular column chromatography. Efficient columns were obtained by coating the capillaries with mixtures of chiral cellulose materials and conventional achiral stationary phases for gas chromatography. In this study, various siloxane and polyethylene glycol polymers were used as achiral components and mixed with different substituted benzoylcellulose derivatives as chiral components. Systematic investigations were carried out to determine the optimal ratio for the components of the stationary phase. Depending on the chromatographic mode—gas chromatography (GC) or supercritical fluid chromatography (SFC)—the stationary phases were found to behave differently. The applicability of the technique was demonstrated by the resolution of various racemic compounds. © 1993 Wiley-Liss, Inc.     

Benzotriazole-Based Polymer Acceptor for High-Efficiency All-Polymer Solar Cells with High Photocurrent and Low Voltage Loss

The power conversion efficiencies (PCEs) of all-polymer solar cells (all-PSCs) have already exceeded 17%. However, the limited absorption range of an all-polymer system results in significantly reduced short-circuit current density (J_sc), which eventually influences the PCE improvement. To broaden the light absorption of polymer acceptors, herein, benzotriazole is introduced in the core unit of small molecule acceptors and thus two narrow-bandgap polymer acceptors named PTz-BO and PTz-C11 featuring the same molecular backbone and different side-chain length are synthesized. Compared with PTz-C11, the PTz-BO based-all PSCs deliver a slightly reduced J_sc, a large open-circuit voltage (V_oc) and a low voltage loss below 0.50 V. Moreover, ternary all-PSCs are constructed by introducing PTz-C11 as a guest component. Benefiting from the reduced recombination, improved exciton generation and dissociation, and balanced charge transport, a high efficiency of 16.58% is obtained for the ternary all-PSCs, with a high J_sc over 25 mA cm⁻² without sacrificing the V_oc. Such result represents the highest efficiency reported for benzotriazole-based all-PSCs in the literature thus far. This work demonstrates the great potential of benzotriazole for the synthesis of efficient narrow-bandgap polymer acceptors.